Salesworth Bio Chemical Division Bangalore,India

	Steam Charts	Multi parameter Integrators
	Cross Checks	Single Parameter Integrators
	Emu-Graph	Multiparameter Integrators
	Integraph	Multiparameter Integrators
	Bowie-Dick sheet	Specific process Indicators
	Dry-Heat Indicator	Specific process Indicators
	Retort-Checks	Specific process Indicators
	Dots	General Process Indicators
	Autoclave Tapes	General Process Indicators

Code-CI 108 /109

Steam Charts

	Class 5 Integrators
	Best Integrator for 121⁰ C
	Temperature specific
	Multiple color change inks
	4 spots show 2 levels of inadequate exposure, 3 spots show correct exposure, 4th spot shows excessive exposure. Shows wet steam and superheated steam.
	Color change is permanent-color interpretation
	guide available
	Plastic Laminated

Code-CI 119

Cross-Checks LF

An economical, inside-the pack or pouch Integrator to check time-temperature ( 2 parameters)

Code-CI 131

EMU-graph

	Class 6 Emulator
	Abrupt color change for 134⁰ C, pre-vac steam
	sterilizers.
	Purple ink with plastic laminate
	Multi-function with 2 ink chemistries

Code-CI 101

Integraph


	Vivid purple to green color change
	Multi-function with three ink chemistries
	Shows wet and superheat conditions
	Color interpretation guide available

Code BD 110

Steri-Pak LF Bowie Dick Test Sheets


	For Pre-vacuum sterilizers at 121⁰C and 134⁰C
	Lead free (environmentally safe) chemistry with
	vivid blue to black color change
	Blue color remains if air leak present
	High standards - ISO compliant
	Procedure for use and Interpretation Guide
	included

Code BD 109

Steri-Pak LF Disposable Bowie-Dick Kit( Re-usable)


	For use in pre-vacuum steam sterilizers (134⁰ C)
	Lead free, blue to black color change-blue color
	remains if there is an airleak
	Complete system of daily Bowie-Dick test -
	RE-USABLE upto 30 times.
	Certificate of conformity enclosed-ISO compliant
	Needs stainless steel holder

Code BD 108

Steri-Pak LF Disposable Bowie-Dick Test Pack (Single use)


	For use in pre-vacuum steam sterilizers (134⁰ C)
	Blue to black color change, vivid blue will remain
	if air leak present
	Can be used as a permanent record- color
	change of black will not fade in sunlight
	ISO compliant

-Interpretation Guide

For interpretation of results using Bowie Dick Test Sheets and kits.

Code-CI 113

Dry-Heat Labels


	Class 1 process indicator
	Simple peel and stick labels
	Shows only single parameter change (temperature)

Code-RC 101

Retort-Checks D (Steam)


	Specific time-temperature indicator for steam cycles
	Purple to green
	For low temperature steam sterilization.

Code- CI 110, 112

Dots


	Least expensive-Class 1 process indicator
	Simple peel and stick labels
	Shows only single parameter change
	(temperature)
	Available for both steam and EO Process

Code- CI 122

Autoclave Tapes


	Simple peel and stick
	Shows only temperature change